PowerTrap® (Mechanical Pump)

Condensate recovery pumps requiring no electricity.

Operating Pressure Range: Vacuum - 200 psig
Operating Temperature Range: 32 - 365 °F

Product Details

	GP10 Specification	Mechanical condensate recovery pump. Uses motive medium pressure to discharge condensate, so there is no need for construction of an electricity supply. Maximum discharge capacity of approximately 18,600 lb per hour.
	GP10L Specification	This is the compact version of the GP10. Operates with a lower filling head than the GP10. Uses motive medium pressure to discharge condensate, so there is no need for construction of an electricity supply. Maximum discharge capacity of approximately 3,640 lb per hour.
	GP10F Specification	Same as the GP10 except this has a straight through connection - inlet on one side and outlet on the other. Also one-piece pump assembly for easy installation and maintenance and retrofit to pump bodies of certain other manufacturers.
	GP14 Specification	Same as the GP10 except with a maximum operating pressure of 200 psig.

Always check the specification PDFs for the exact product specification available in your region.

Energy Conservation: Recovers and transports condensate in order to recycle heat energy and water resources.; The snap-action mechanism rapidly switches between condensate in-flow to the mechanical pump and discharging the condensate, preventing delay-induced leakage of motive medium (steam, air).
'Stall' prevention: The steam using equipment installing the control valve has a tendency of 'stall' phenomenon, resulting process temperature swings, water hammer or tube corosion. By installing PowerTrap® this stall phenomenon can be prevented.
Easy to Operate: The unit is powered by steam or air, so there is no need for electrical facilities, which makes it suitable for use in explosionproof installations.; Designed to allow maintenance without being removed from condensate recovery lines.

Reboilers, heat exchangers, cylinder dryers, etc.