- Home
- Products
- Steam Traps
- PowerTrap® (Compact)
- Overview
Fluid Control Equipment
PowerTrap® (Compact)
GT5C
What is the stall phenomenon?
Does your water air conditioner, dryer or heater exhibit signs of water hammer, corrosion or uneven Heating?
These problems could be caused by condensate accumulating in the equipment. This phenomenon is known as 'stall' and causes damage to equipment along with poor product quality if left untreated. As a steam trap cannot discharge condensate during a stall, further investment such as installing a vacuum pump in addition to the existing steam trap is required.
Compact Fusion of Mechanical Pump and Steam Trap with Low Filling Head
The PowerTrap GT5C is an incredibly compact mechanical pump with a steam trap not only discharging condensate when pressure inside the equipment is high, but also pumping out condensate by using steam as a motive medium when the pressure inside the equipment is low. The GT5C also enables simplified piping in comparison to existing mechanical pumps.
Installation Piping Example
Advanced Technology in a Compact Body
Pump and Trap Operation for Stall Prevention (Animation)
Option
Insulated Cover
The special heat-retaining cover made of glass mat and glass cloth prevents burns and can be attached and removed with MAGICTAPE* fastening, which helps reduce the time required to work.
| Model | RK8 |
|---|---|
| Photo |  |
*MAGICTAPE is a registered trademark of KURARAY CO., LTD.