Skip to main content
  1. Home
  2. Products
  3. Steam Traps
  4. Clean Steam Traps

Fluid Control Equipment

Clean Steam Traps

LV6/LV6-HC/LV6D Series

Stainless Steel Thermostatic Steam Traps for Pure and Clean Steam Systems

The LV6, LV6-HC, and LV6D series are balanced pressure thermostatic steam traps recommended for draining reactors, sterilizers, and distribution lines in pure and clean steam systems.

The LV6-HC and LV6D series feature new and improved models with higher discharge capacities than the standard LV6, thanks to the new C2 type X-element, further reducing start-up times.

All are designed for easy operation and cleaning, and are available with a range of surface finishing to meet the most stringent requirements.

Benefits and Features

The interior of these steam traps is designed to prevent corrosion and bacterial growth.

All components are made of stainless steel. 
The X-element discharges hot air as well as low-temperature air and cold condensate. This encourages the inflow of steam, thereby reducing start-up times. 
Clamp connection at the joint allows for easy disassembly and cleaning.

Range of Products to Meet the Required Cleanliness Level

Interior and exterior surfaces of the steam trap are available in three classes, natural machining, fine machining and buff-polishing. Models are also available with electro-polished surfaces for further improved to prevent bacterial growth.

Application Areas

Condensate removal from clean and pure steam.

  • Bio industries
  • Manufacture of pharmaceuticals
  • Medical sterilizers
  • Food production, etc.

Product Details

ModelPhotoConnectionBody MaterialPMO (MPaG)TMO (°C)Discharge Capacity (kg/h)FinishingX-element typeSpecificationsManual
InternalExternal
LV6-CEClamp End / 
Tube End
Stainless Steel 
(AISI 316L)
0.6165770Natural MachiningStandardSpecificationsManual
LV6-CFFree-draining
LV6-SF0.8μm Ra 
Fine Machining
1.2μm Ra 
Fine Machining
LV6-P0.8μm Ra 
Buff Polished
1.2μm Ra 
Buff Polished
Free-draining 
(electro-polished)
LV6-HC1020Natural MachiningStandardSpecifications
LV6-HS0.8μm Ra 
Fine Machining
1.2μm Ra 
Fine Machining
Free-draining
LV6-HP0.8μm Ra 
Buff Polished
1.2μm Ra 
Buff Polished
Free-draining 
(electro-polished)
LV6D-HCLV6DClamp End1850Natural MachiningStandardSpecifications
LV6D-HS0.8μm Ra
Fine Machining
1.2μm Ra
Fine Machining
Free-draining
LV6D-HP0.8μm Ra
Buff Polished
1.2μm Ra
Buff Polished
Free-draining
(electro-polished)
  • PMO = Maximum Operating Pressure
  • TMO = Maximum Operating Temperature

The latest version of each product's instruction manual can be found on this page.

Product Related Information