- Home
- New Products
New Products
BD800
Bypass blow valve
This is a bypass blow valve that prevents leakage of the internal valve even at high pressure and high temperature during trap bypass blow at plant startup.
Prevents wall thinning due to scale entrapment and erosion, which are causes of inner valve leakage.
Even after bypass blow at high pressure, such as differential pressure exceeding 4 MPaG, the valve does not leak and provides high sealing performance for a long period of time.
SC-F71
Digital indicating controller
The only controller that can be used in combination with MC-COS series control valves.
PID control is also possible for general-purpose control valves. Compatible with various types of measurement inputs and equipped with a variety of functions as standard, including 16-point memory of target setpoints, 4 event outputs, and 3 analog outputs.
Setting values can be read/written from/to a PC using a dedicated cable (sold separately).
SC Series
Steam compressor
The SC series steam compressors, which boost the pressure of low-pressure steam for effective use, are now available in the SC14/SC21/SC31 large-capacity types. The maximum intake steam flow rate of 3100 kg/h can be used not only for waste heat recovery but also for supply-demand balance compensation of the main steam system.
A-DR20
Direct-acting pressure reducing valve for air
Lightweight and compact direct-acting pressure reducing valve with stainless steel body and main parts.
By designating it for air use only, a soft seat with excellent sealing performance is used for the main valve seat to prevent pressure buildup at the shut-off point.
GP5C
Mechanical Pump (PowerTrap)
The most compact new mechanical pump that collects condensate without electricity is now available.
With a minimum head of 155 mm, it can be used in small facilities where the condensate outlet tends to be low. Ideal for condensate recovery in open systems.
GT14L
Steam trap with integrated pump function (PowerTrap)
A new medium-capacity type that can be used up to 1.4 MPaG has been added to steam traps that also have a pump function.
With a minimum head of 300 mm, it can be installed in facilities with low drain outlets. It is ideal for condensate recovery in air-conditioning and refrigeration equipment and for countermeasures against condensate retention that causes water hammer and metal corrosion.
GP14L
Mechanical pump (PowerTrap)
A new medium-capacity mechanical pump that can be used up to 1.4 MPaG has been added to the mechanical pumps that collect condensate without using electricity.
With a minimum head of 300 mm, it can be installed in facilities with low condensate outlets. It is ideal for condensate recovery in open systems where condensate from multiple units is collected and pumped.
DR8
Direct-acting pressure reducing valve for clean steam
The structure of this valve does not hold condensate, making it difficult for bacteria to grow, making it ideal for steam line pressure reduction in autoclaves, sterilizers, and sterilizers.
Easy to disassemble, clean, and sanitize. Prevents external leakage of steam, and features stable operation and long life.
SC-S21
Digital Indicating Controller
Easy-to-use controller with a compact body, large, easy-to-read display screen, speed response, and speed convergence.
Combined with electric valves, pneumatic valves, solenoid valves, and control valves (CV5/CV10/CV-COS, etc.), automatic control of process pressure, flow rate, level, etc. can be performed.
V1 Series/V2 Series
Trap Station
Stainless steel body trap station integrating bellows valve and steam trap enables compact piping design.
It reduces design and piping installation man-hours and improves maintainability.
V1P Series/V2P Series
Trap Station
Trap station made of forged steel body or stainless steel with integrated piston valve and steam trap enables compact piping design.
It reduces design and piping installation man-hours and improves maintainability.
PN-COS-16
Pneumatic control valve (with built-in separator and trap)
Pneumatic control valve that can be used as an automatic pressure control valve or as a remotely operated pressure reducing valve.
It has a built-in separator and steam trap to supply high quality steam.
PN-COSR-16
Pneumatic Control Valve for Steam
Pneumatic control valve that can be used as an automatic pressure control valve or as a remotely operated pressure reducing valve.
This model without separator/trap is suitable for locations where a separator is already installed.
GT14M
Steam trap with integrated pump function (PowerTrap)
A new steam trap with a pump function that can be used up to 1.4 MPaG has been added to our steam trap lineup.
With a minimum head of 350 mm, it can be installed in facilities with low drain outlets. It is ideal for condensate recovery in air-conditioning and refrigeration equipment and for countermeasures against condensate retention that causes water hammer and metal corrosion.
GP14M
Mechanical pump (PowerTrap)
A new mechanical pump that collects condensate without electricity and can be used up to 1.4 MPaG has been added to the lineup.
With a minimum head of 350 mm, it can be installed in facilities with low condensate outlets. It is ideal for condensate recovery in open systems where condensate from multiple units is collected and pumped.
M4P Series
Manifold
This manifold has a forged steel body with a piston valve in the valve section.
It is used for branch piping of steam and collective piping of condensate in tracing and general processes, etc., and realizes compact piping.
Cycle Counter C1CM/C1SM
Cycle counter
This is a cycle counter to be attached to the GP series power traps.
It counts the number of times the power trap operates intermittently. It can be used to monitor the operating condition and check the maintenance cycle.
JA7.2/JAH7.2R/JA7.5/JAH7.5R/JA8/JAH8R
Large capacity free-float air trap
Large capacity drain trap for compressed air systems.
The free-float type allows continuous drainage operation with no drainage delay. It can handle a large capacity of 20 tons per hour.
J6S-X
Free Float® steam trap for equipment
Newly introduced with condensate discharge capacity between J5X and J7X.
Selection can now be more finely matched to on-site applications than ever before. Made of corrosion-resistant stainless steel, it is effective in environments where durability is required.
SC Series
Steam compressor
Heat dissipation to the atmosphere, heat energy of the released steam can be recovered and boosted to be reused as low or medium pressure steam.
SF1
Separator filter
Separator filter for steam and gases (non-toxic and non-flammable) is now available.
Cyclone separator + sintered wire mesh filter maintains performance for a long period of time. Easy to clean and can be used repeatedly.
CKF3MG / CKF3RG
Spring loaded disc-type check valve
Unique center bar system for durability. Wafer type with flange clamping.
JH Series
Free Float® steam trap for equipment (high temperature and high pressure)
The JH series has three important features for equipment steam traps: a large condensate discharge capacity, an automatic blowing mechanism with strong air rejection capability, and a design that can be used under high pressure.
JX Series
Free-float steam trap for equipment
The JX series is a steam trap for equipment that continuously discharges condensate and has a large condensate discharge capacity in a compact design, as well as an automatic blowing mechanism with powerful air rejection capability thanks to the use of an X-element.
M Series
Manifolds
The M series manifolds reduce the man-hours required for designing and installing steam or condensate piping, and the packaged design of the valve and steam trap also reduces maintenance costs and man-hours.
SST Series
Free Float® Steam Traps for Main Lines
The SST series is a series of steam traps optimally designed for steam transport piping applications, taking into consideration that steam loss during condensate discharge operation is small and performance can be maintained stably over a long period of time.
GT5C
Steam trap with built-in pump function for air conditioning (PowerTrap)
Operates with an extremely low water head of 155 mm. Ideal for stall protection for air handling units and small steam air heaters.
No exhaust pipe is required for easy installation. Stainless steel version is also available as a standard product.
DC Series
Separator
This is an air-water separator that forcibly separates condensate generated and mixed in steam or air piping.
The built-in cyclone swirls steam or air at high speed to separate heavy condensate by centrifugal force, achieving a separation efficiency of 98% (at steam flow velocity of 30 m/s).
GP10-1CJ / GP10-2FJ / GP10L-1AJ
Mechanical pump system package (PowerTrap)
The PowerTrap GP series condensate recovery pumps, which are steam/air driven and require no electricity, are now available in three new system packages that combine the necessary equipment in a compact package.
VB3 / VB3-H
Large-capacity vacuum breaker
This is a compact, large-volume vacuum breaker valve.
For seawater applications, duplex stainless steel is used for its high corrosion resistance.
GT10 / GT10L
Steam trap with built-in pump function (PowerTrap)
Operated by steam or air pressure without electricity. It is effective in eliminating condensate retention in the equipment.
Even under conditions where condensate is difficult to be discharged with the trap, it can be forcibly eliminated with the pump function. Ideal for closed systems that completely recover waste heat and water resources from steam-using equipment condensate.
GP10 / GP10L
Mechanical Pump (PowerTrap)
Pump that pumps condensate by steam or air pressure without using electricity.
Ideal for open systems that collectively recover condensate waste heat and water resources discharged from multiple steam-using units.
COSPECT®
Pressure reducing valve with built-in separator and trap
The pressure reducing valve itself forcibly separates and eliminates condensate, thus supplying 100% dry steam to the process.
LEX3N-TZ
Temperature control trap (with built-in descaling function)
Effective for tracing lines at temperatures below 80°C.
The descaling function eliminates valve seat clogging while still piping.
CV-COS
Pneumatic control valve (with built-in separator and trap)
A new type of control valve with built-in cyclone separator and free-float steam trap to improve steam quality.