- Operation Animations
- Steam Traps
- Free Float® Steam Traps for Main Lines: SS series
- Free Float® Steam Traps (Low Pressure): JX/JHX series
- Disc-Type Steam Traps: ThermoDyne
- Disc-Type Steam Traps: PowerDyne®
- Thermostatic Steam Traps: L-Series
- Temperature Control Traps: LEX-3N TZ
- Condensate Recovery
- PowerTrap® (Mechanical Pump with Built-in Trap): GT-10
- PowerTrap® (Mechanical Pump): GP-10
- Pressure Reducing Valves
- Pressure Reducing Valves for Steam: COSR
- Pressure Reducing Valves (Direct Acting): DR20
- Cyclone Separators
- Cyclone Separators for Steam (with Built-in Trap): DC series
- Accessories
- Automatic Non-freeze Valves: NF6
- Air Vents
- Automatic Air Vents: VS1C
- Rapid Initial Air Vents: VA series
- Air Vents for Steam: LA series
- Air and Drain Traps
- Free Float® Air Traps: JA series
- Air Traps for High Viscosity Condensate: TATSU2
- Peripheral Equipment
- Steam Condensing Heat Exchanger : SR series
SR Series Steam Condensing Heat Exchanger
Exhaust steam flows into the top of the exchanger as cool water enters the heat transfer coil from the bottom and flows upward toward the top of the exchanger.
The steam is cooled upon contact with the heat transfer coil containing the cool water and condenses, transferring its latent heat. As a result, the temperature of the water in the coils rises.
The resulting condensate drips down to collect in the base of the exchanger. Once the condensate level rises high enough, it flows over the top of the drain pipe and is discharged.