Skip to main content
  1. Home
  2. Products
  3. Steam Traps
  4. PowerTrap® (Mechanical Pump with Built-in Trap)

Fluid Control Equipment

PowerTrap® (Mechanical Pump with Built-in Trap)

GT Series

Reduces the possibility of damage to steam equipment

This pump is mechanically operated with steam or compressed and does not require electricity.

Effective at eliminating pooled condensate from inside equipment.

The PowerTrap® is capable of discharging condensate under conditions in which a steam trap alone would not suffice.

Suitable for use on closed systems for the complete recovery of condensate heat and water from steam-using equipment.

PowerTrap® GT/GP Series Pamphlet

Product Selection by Application

Benefits and Features

Energy Conservation

Recovers and transports condensate in order to recycle heat energy and water resources.
The snap-action mechanism rapidly switches between sending condensate to the mechanical pump and transporting the condensate, preventing delay-induced leakage of motive medium (steam).

'Stall' prevention

Steam-using equipment with a control valve installed on its primary side has a tendency to stall, resulting in process temperature swings, water hammer, and/or tube corrosion. By installing PowerTrap®, this stall phenomenon can be prevented.

Easy to Operate

The GT series has an integral steam trap, making it suitable for condensate recovery from equipment that experiences pressure fluctuations from negative to positive pressure.
The unit is powered by steam, so there is no need for electrical facilities, which makes it suitable for use in explosion-proof installations and other environments where electrical power supply is not an option.
Designed to allow maintenance without being removed from condensate recovery lines.

Application Areas

  • Reboilers, heat exchangers, cylinder dryers, air conditioning equipment, absorption cooling machinery, etc.

Product Details

Model Photo Connections Filling Head [mm] Body Material PMO
(MPaG)
TMO
(°C)
Motive Medium Pressure Range (MPaG) Max. Pump Discharge Capacity (t/h) Built-in Trap Cap. (t/h) Specifications Manual
Inlet
Outlet
Motive Inlet
Motive Outlet
Standard Minimum
GT10L Screwed 630 300 Cast Iron
(FC250)
or
Cast Steel
(ASTM A216
Gr.WCB)
1.05 185 0.03 - 1.05 1.4 10.5 Specifications Manual
Flange-less
(Wafer)
Screwed
GT14 Screwed 630 300 Cast Iron
(FC250)
1.4 200 0.03 - 1.4 5.5 13 Specifications Manual
Screwed Cast Steel
Flanged
GT14L Flange-less
(Wafer)
Screwed 630 300 Cast Iron
(FC250)
1.4 220 0.03 - 1.4 2.2 13 Specifications Manual
Cast Steel
(ASTM A216
Gr.WCB)
GT14M Flange-less
(Wafer)
Screwed 630 350 Cast Iron
(FC250)
1.4 220 0.03 - 1.4 3.4 14 Specifications Manual
Cast Steel
(ASTM A216
Gr.WCB)
GT10 Screwed 860 710 Cast Iron
FC250
1.05 185 0.03 - 1.05 8 40 Specifications Manual
Cast Steel
(ASTM A216
Gr.WCB)
Flanged Cast Steel
(ASTM A216
Gr.WCB)
  • PMO = Maximum Operating Pressure
  • TMO = Maximum Operating Temperature

The latest version of each product's instruction manual can be found on this page.

Product Related Information