- Success Stories
- 1. Food & Beverage
- 2. Oil Refinery
- 3. Animal Feed Processing
- 4. Textiles & Laundry Services
- 5. Other
See examples of how TLV has helped its customers lower costs and emissions while striving to create more efficient and dependable solutions.
Issue: Frequent steam leaks require constant maintenance, lower production efficiency
Solution: Optimizing the mash tun’s steam heating system prevents leakage and eliminates failures
Issue: Undetected trap failures responsible for excess energy costs each year
Solution: Performing a steam trap survey reveals 8 out of 30 traps have failed; replacing these with TLV products and installing COS-Rs at the brewery yields higher efficiency and dependabilty.
Issue: Unable to consistently produce hot water needed for cleaning processes
Solution: TLV provides the HeatPack, a packaged heat exchanger capable of rapidly supplying high volumes of hot water
Issue: Greencore wishes to increase the efficiency of 10 cooking vessels on site
Solution: TLV’s CV-COS, a pneumatic control valve with a built-in separator and steam trap, improves the quality of Greencore steam and allows for quick changes in pressure needed to cook different sauces.
Issue: Trap failure rate of 53% causes huge financial losses
Solution: Failed traps swapped for TLV models, maintenance plan implemented to keep failure rates to a minimum
Issue: High trap failure rate and low reliability causes problems for management
Solution: Implementing TLV products and strategizing with TLV results in improved steam trap management and financial savings
Issue: BOCM Pauls suspects steam trap failures at many of their sites, but cannot identify the failures without proper equipment
Solution: Using the TrapMan TM5, TLV diagnoses each trap and estimates the potential losses caused by failures. Finding the results very useful, BOCM Pauls extends the survey to all of their sites.
Issue: Leakage from steam traps and bypass valves, as well as poor steam distribution and condensate discharge piping design, causes energy costs to rise
Solution: TLV replaces valves and improves the design of piping, which leads to lower fuel consumption and energy costs
Issue: Steam pressure must be reduced from 10 bar to 6-8 bar for synthetic linen processing
Solution: TLV introduces CV-COS to the system, allowing for automatic pressure control as well as condensate separation and an improved system layout
Issue: Meeting an annual steam demand of 870 tons requires improvement in system efficiency
Solution: TLV develops a flash steam recovery system, allowing steam to be re-used and reducing the burden on the boiler
COSPECT is a robust alternative to traditional pressure reducing valves that often offers customers over a decade of reliable service. Here we share with you some long-term results from customers who chose COSPECT.
This allows the hospital to monitor how much steam is being used by the old and new buildings and, by monitoring and comparing daily gas, water and steam readings, identify any significant jumps in demand.
Read how TLV was able to assist the Museum of Power in the UK with the restoration of a vintage Marshall steam engine!